Machine cut .3 mil vinyl.  


Durable 10 oz. vinyl banners.

Different typestyles to choose from.

Different colors to choose from.

Place an order.

Several examples of how prices work.

A brief explanation of how to apply.

Homepage




Every order comes complete with
instructions and a
FREE plastic
squeegee for the application.

 

ACTUAL IMAGES OF FREE SQUEEGEE

IMPORTANT ! ! !  Be sure to thoroughly clean the surface of where you are
applying the lettering... Click here for help.
Below is a quick explanation of how to apply vinyl lettering.
JohnRichSigns.com does not recommend the use of application fluid for installing our products.
Tape in place from both ends and make
sure to level the lettering. Once it is straight,
tape it in the center on top and bottom.

Remove the tape on the right side and
peel back the transfer tape. Carefully
cut the backing paper and remove it.

Hold the transfer tape steady and
squeegee from the center outwards.

Remove the rest of the masking tape
and peel back the remaining half.
Remove the other piece of backing.

Hold the transfer tape steady and
squeegee from the center outwards.

Remove all of the transfer tape and
be stunned by how good it looks.

You will also need to have some items of your own.
Such as... Tape Measure, Scissors, Exacto Knife, Masking Tape,
Paper Towels and Glass Cleaner or Soap and Water.
 
Banners | Lettering | Fonts | Colors | Order | Policy | About Us | Contact
JohnRichSigns.com Copyright 2005 - 2009. All rights reserved.